English
How to use the meeting cost calculator
This meeting cost calculator turns a calendar invite into a number: what the people in the room cost for the time they spend there. It works for a one-off call, a weekly team sync or a daily standup, and it takes about a minute to set up.
- List the attendees by role. Each row has a role name, how many people hold that role and what they earn. A meeting with four engineers, a product manager, a designer and a manager is four rows, not seven.
- Choose how you enter pay. Hourly rate is the quickest if you know it. Annual salary divides by your working hours per year (2,080 by default) to get an hourly rate.
- Set the meeting length with the minutes box or the 15, 30, 45, 60, 90 and 120 buttons, and pick a currency.
- Say how often the meeting repeats. The yearly figure appears straight away.
- Optional: add overhead if you want the cost to the employer rather than the pay alone.
The prefilled numbers describe a 60 minute weekly meeting: four engineers at 60 an hour, a product manager at 75, a designer at 55 and an engineering manager at 85. That group costs 455 an hour, so the meeting costs 455, and a year of weekly meetings (48 of them) costs 21,840.
How is the cost of a meeting calculated?
Take every attendee's hourly cost, multiply by the hours in the meeting and add the results. Because the sum is done per role, a mix of junior staff and executives is handled properly instead of being averaged.
Cost of the meeting = Σ (people in role × hourly cost) × minutes ÷ 60
Cost per minute = Σ (people in role × hourly cost) ÷ 60
Cost per year = cost of the meeting × meetings per year
If you only know salaries, convert first: hourly rate = annual salary ÷ working hours per year. At 2,080 hours (40 hours a week for 52 weeks), a salary of 104,000 is 50 an hour and 75,000 is about 36.06. If your contract says 37.5 hours a week, use 1,950 instead, or whatever your own year really holds.
How much does a typical meeting cost?
The table uses a flat 50 an hour for everyone, so you can scale it to your own rate. Double the rate and every figure doubles. The yearly column assumes the meeting repeats weekly for 48 weeks.
| People | Length | Cost of one meeting | Cost per year (weekly) |
|---|---|---|---|
| 4 | 30 min | 100 | 4,800 |
| 6 | 60 min | 300 | 14,400 |
| 8 | 60 min | 400 | 19,200 |
| 10 | 60 min | 500 | 24,000 |
| 12 | 90 min | 900 | 43,200 |
| 20 | 60 min | 1,000 | 48,000 |
The jump from 8 to 20 people is the one to look at. Adding twelve people to an hour-long meeting adds 600 every time, and the last twelve are usually there to listen.
What does a daily standup cost per year?
Short meetings look harmless until they repeat. A 15 minute standup with 8 people at 50 an hour costs 100. Run it every working day for 48 weeks and you have 240 meetings, which is 24,000 a year, or 480 hours of paid time across the eight people. Pick Every working day in the repeat menu and the calculator shows the same sum for your own team.
That does not mean standups are a waste. A standup that stops one person from spending a week on the wrong thing pays for itself many times over. The number only tells you how much attention the meeting has to earn.
Should you add overhead to the hourly rate?
It depends on the question you are asking. If you want to know what the time is worth to the people in the room, use pay only. If you want to know what the meeting costs the company, add overhead, because the employer also pays taxes, benefits, equipment and office space on top of salary. A common approach is to add a percentage for that, such as 30, which turns 50 an hour into 65. The right percentage depends on your country and your company, so use a figure from your finance team if you can get one.
How does the live timer work?
Switch to the Live timer tab and press Start when the meeting begins. The counter adds money every second at the combined rate of everyone in the room. With the default team (455 an hour, or 7.58 a minute), the counter reads about 75.83 after 10 minutes and 455 after an hour. A bar shows how much of the planned time is used, and the label turns red once you run over.
Pause stops the clock for a break and Resume continues from the same point. If someone joins or leaves, change the people count in the left panel: the cost per second changes from that moment, though the total is recalculated from the elapsed time at the new rate. Projecting the timer on a screen at the start of a recurring meeting tends to make people keep it short.
What the number leaves out
A meeting cost is not an invoice. Salaried people are paid whether they attend or not, so nothing leaves the bank account because of the meeting itself. The figure is the value of the time, in what it would cost to buy those hours.
It also says nothing about what the meeting produced. A 400 meeting that settles a decision worth months of work is cheap, and a 60 meeting that nobody needed is expensive. Use the result to compare meetings against each other and to ask whether each person in the room needs to be there, not to argue that meetings are bad.
Ways to bring the cost down
- Cut the length. Ending a meeting 15 minutes earlier saves a quarter of an hour of everyone's time, every time it repeats. The Ways to cut it box under the result works out the exact amount.
- Cut the invite list. Anyone who only needs the outcome can read a short summary instead. The tool shows what one fewer person saves on average.
- Move the update to writing. A status round that takes 30 minutes live often takes five minutes to write and two to read.
- Switch a weekly meeting to every second week. That halves the yearly figure at once.
When you have a result you like (or one that surprises you), use Copy text to paste a one-line summary into a chat or an invite, or Copy link to send a link that opens with your exact setup.
Frequently asked questions
How do you calculate the cost of a meeting?
Multiply each attendee's hourly cost by the meeting length in hours, then add everyone up. Eight people at 50 an hour in a 1 hour meeting cost 400. This calculator does the same sum per role, so a mix of juniors and managers is handled correctly.
How do I turn an annual salary into an hourly rate?
Divide the salary by the working hours in a year. With 2,080 hours (40 hours a week for 52 weeks), 104,000 a year is 50 an hour and 75,000 a year is about 36.06 an hour. Switch to Annual salary and the tool does it for you.
How much does a daily standup cost per year?
A 15 minute standup with 8 people at 50 an hour costs 100 each time. Run it every working day for 48 weeks (240 meetings) and it adds up to 24,000 a year. Pick Daily in the repeat menu to see your own figure.
Should I add overhead on top of salary?
If you want the real cost to the company, yes. Employers also pay taxes, benefits and equipment, so a person costs more than their pay. Enter a percentage in the overhead field, for example 30, which turns 50 an hour into 65. Leave it at 0 to use pay only.
Is the meeting cost an actual expense?
No. Salaried staff are paid the same whether the meeting happens or not. The number is the value of the time spent, which is what those people could have worked on instead. Use it to compare meetings, not as a bill.
How does the live cost timer work?
Press Start on the Live timer tab when the meeting begins. The cost rises every second at the rate of everyone in the room: 455 an hour is 7.58 a minute, so after 10 minutes the counter reads about 75.83. Pause and Reset work like a stopwatch.
Can I use a currency other than dollars?
Yes. Pick any of the listed currencies and the results are formatted for it. The tool does not convert your rates, so type your hourly rates or salaries in the currency you choose.
Are my numbers sent anywhere?
No. Everything is calculated in your browser. The last values you used are kept on your own device so they are there next time, and the share link carries your numbers inside the link itself, not on a server.