QR Code and Barcode Scanner

Scan a QR code or barcode with your camera, or read one from a screenshot, photo or pasted image. Links are shown in full with a safety check before you open them, and WiFi, contact and product codes are laid out clearly. It all runs in your browser, so nothing is uploaded.

Scan

The camera stays off until you press Start camera. Video is analysed on this device and never recorded or sent anywhere.

Nothing leaves your device. The camera and images are decoded in this browser, and codes are never sent to a server. The decoder is downloaded once the first time you scan.

Results

No codes scanned yet

Scan with the camera or add an image. Links get a safety check before you can open them, and WiFi, contacts and product numbers are laid out clearly.

History

Stored in this browser only, up to 100 scans. A WiFi code in the history includes its password, so turn this off on a shared computer.

Nothing saved yet.

    How to scan a QR code online

    This free QR code scanner reads codes with your phone or computer camera, or from any image you have on the device. Nothing is uploaded: the picture is decoded in your browser.

    1. On the Camera tab press Start camera and allow access. Phones open the rear camera first, and Switch camera appears if there is more than one.
    2. Hold the code steady until it is outlined in green. The result appears on the right and the camera pauses, so you can read it. Press Scan again for the next code, or tick Keep scanning to collect a whole batch.
    3. In low light turn on the Torch, and use Zoom for a code on a distant poster. Both buttons only show up when your camera supports them, which is common on Android and rare on laptops.

    Fill about half the frame with the code. Too close and it goes out of focus, too far and the squares blur into each other.

    How do I scan a QR code from a screenshot or image?

    Open the Image or screenshot tab and choose a file, drop it on the box, or copy an image and press Ctrl+V (Cmd+V on a Mac). This is the way to read a code someone sent you in WhatsApp, a PDF page you captured, or a QR code shown on the same screen you are using, where a camera can't help.

    If the picture holds several codes, each is outlined and numbered, and each gets its own result card with the same number. Large photos are scaled down before reading, which helps with noisy shots. If nothing is found, crop closer to the code. A screenshot nearly always works better than a photo of a screen.

    Is it safe to scan a QR code?

    Scanning is safe. Opening what comes out is where the risk sits, because anyone can print a code and stick it over a real one, on a parking meter or a restaurant table, so that it leads to a fake payment or login page. Security people call this quishing.

    So this scanner never opens anything by itself. A link is shown in full, with the website name in bold and any sub-domain in grey, and you have to press Open link and confirm. It also flags these signs:

    WarningWhy it matters
    Not encrypted (http)Anything you type on the page can be read on the way
    Shortened linkThe real destination is hidden until you open it (bit.ly, tinyurl.com and similar)
    Username before the site nameIn https://[email protected] the real site is the part after the @
    Numeric addressLegitimate services almost always use a name
    Non-Latin letters (xn--)A Cyrillic "а" looks identical to a Latin "a" in a fake address
    Many sub-domainsFake sites hide behind names like login.bank.secure.example.com, where the real site is example.com

    No warning does not mean a link is safe. The tool can't know what is on the page. Check that the bold website name is the one you expect, and if a code asks for a payment or password, go to the company's site by typing its address yourself.

    What the scanner shows for each kind of code

    Code containsYou get
    Web linkFull link, website name, warnings, copy, confirmed open
    WiFi loginNetwork name, security, hidden password with Show, copy buttons
    Contact (vCard or MECARD)Name, phones, emails, address, and a .vcf file to import
    Calendar eventTitle, start, end, place, and an .ics file
    Email, phone, SMSDetails laid out, with buttons that open your mail, phone or messages app
    Location (geo:)Latitude and longitude, with map links
    Product barcodeThe number, a check-digit test, ISBN recognition for books
    Authenticator setup (otpauth)Account and issuer, with the secret hidden and a warning
    Anything elseThe text, ready to copy

    Links that start with javascript: or data: can run code, so the scanner shows them as plain text with a warning and gives no way to open them.

    Can it scan barcodes too?

    Yes. It reads EAN-13, EAN-8, UPC-A, UPC-E, Code 128, Code 39, Code 93, Codabar, ITF, Data Matrix, Aztec and PDF417. A product barcode only holds a number. The name and price live in the shop's database, so the scanner shows the number and offers a web search for it instead of guessing. A wrong check digit usually means the camera misread a digit, so scan again.

    Barcodes are harder to read than QR codes because they are thin lines. Hold the camera parallel to the bars, in good light, and let it focus. Choosing Product barcodes in the Look for menu speeds things up when you only want EAN and UPC.

    Camera permission denied or the camera won't start

    The camera also stops when you switch to another tab, so it is never left running in the background.

    What stays on your device

    Camera frames and images are decoded in the browser with a scanner built into Chrome and Android where available, and with an open-source WebAssembly decoder (ZXing) everywhere else. That decoder is fetched once from a public CDN the first time you scan. After that, nothing about your scans leaves the device. The optional history is stored in this browser only, holds the last 100 scans, and can be turned off or cleared at any time.

    Frequently asked questions

    How do I scan a QR code without an app?

    Open this page, press Start camera, allow access and hold the code in front of the lens. On a phone the rear camera is used first. Most phones also scan QR codes straight from the built-in camera app, but this page adds a link check and works on computers with a webcam.

    Can I scan a QR code from a screenshot or image?

    Yes. Switch to Image or screenshot, choose a file, drop it on the box or paste with Ctrl+V. It works with PNG, JPG, WebP and GIF, finds several codes in one picture, and marks each one with a number.

    Is it safe to scan a QR code?

    Scanning only reads the text. The risk starts when you open what it points to, because anyone can print a code that leads to a fake login page. That is why links here are shown in full, with the website name in bold and warnings for look-alike or hidden destinations, and are never opened automatically.

    Is my camera video or my image uploaded?

    No. The camera feed and the images are decoded inside your browser and are never sent to a server. The only download is the decoder code itself, fetched once the first time you scan. Your scan history is kept in your own browser and you can switch it off.

    Why does the camera say permission denied?

    Your browser has the camera blocked for this site, or you tapped Block once. Click the camera or lock icon in the address bar, set Camera to Allow and press Try again. If another app such as a video call is using the camera, close it first.

    Can it read barcodes as well as QR codes?

    Yes. It reads EAN-13, EAN-8, UPC-A, UPC-E, Code 128, Code 39, Code 93, Codabar, ITF, Data Matrix, Aztec and PDF417. Product codes show their number with a check-digit test, and ISBNs on books are recognised.

    How do I read a WiFi QR code?

    Scan it and the network name, security type and password appear, with copy buttons. A web page can't connect your device to WiFi, so copy the password into your settings, or scan the same code with your phone's own camera app, which joins directly.

    Why won't my QR code scan?

    Blur, glare and a code that is too small or cut off at the edge are the usual causes. Move closer until the code fills about half the frame, turn the torch on in low light, or use the zoom slider where your camera supports it. For an image, crop tightly around the code.